Brand：Pattex
Model：PKME15C
Name：Power Epoxy (Express Metal)
Capacity：2 x 15ml


Applications
Pattex Repair Metal Power Epoxy is a two-part adhesive of high viscosity which provides a good dimensional stability and strong adhesion. It is used for gap filling repairing and bonding meterials: metals (steel, iron, aluminum, copper, brass) concrete, ceramic, glassware, auto trimmings, wood and fiberglass, etc.


Characteristics
- High adhesion strength
- Fast setting
- Excellent performance in bonding and gap filling
- Repaired surface can be painted. Metallic grey suits for various materials
- Reliable heat resistant
- Strong resistance to water and most chemical environment
- High tolerance to most fuels and solvens


Instructions
- Surfaces to be cleaned and free from moisture, rust, dust, grease, paint and oxide
- Mix equal amount of Part A Resin and Part B Hardner in 1:1 by volume with a spatula
- Mixed adhesive should be used within 5 min.
- Apply a thin layer of the mixture evenly on both side of the surfaces. Assemble the surfaces and
  press them together with tapes or weights for 15 min. to allow initial curing
- After 2 hours, a strong bond is formed

Notes
- Make sure the caps are correctly covered in right tubes after use
- Applicaation is carried out in a well-ventilated area
- Avoid contact with skin and eyes. Once it occurs, flush with water and consult doctor immediately
- Keep out of reach of childred