操作極其簡單，只需將此光度計指向光源即可測量光線強度。

GM1010是應急照明和其他工作環境的理想選擇，它可以快速簡便地查找您的照明系統是否正確安裝並發出正確的水平。 該光度計可使用儀器頂部配備的矽光電二極管傳感器測量高達200000勒克斯的光含量。

GM1010 測光儀
*測量範圍:0Lux～200,000Lux/0Fc～18500Fc
*精確度:
±3% rdg±0.5%f.s.(<10,000Lux) ±4% rdg±10dgts.(>10,000Lux)
*數字更新:2次／秒
*光度探頭:矽二極管
*電池壽命:不少於60個小時
*操作溫濕度:0℃～ 40℃, 10%RH ～ 90%RH
*保存溫濕度:-20℃～ 50℃, 10%RH ～ 90%RH
*電源:9V電池
*產品尺寸:52.5*35.5*166毫米
*產品重量:110.4克
*LUX（勒克斯）/FC(尺燭光)單位選擇功能
*無操作5分鐘後自動關機
*背光功能，便於暗室操作
*最大值及最小值測量功能
*自動測量功能(AUTO)
*數據上升下降時間短
*低電壓電池符號指示


Extremely simple to operate, just point this light meter at a light source to measure the level of light.

Ideal for emergency lighting and other working environments, the GM1010  provides a quick and easy way of finding if your lighting systems are correctly installed and giving off the correct levels. This light meter can measure light content up to 40000 lux using the silicone photo diode sensor equipped to the top of the instrument.

Benetech® GM1010 Pocket Light Meter Key Features

Range of 200000 lux
Small, compact size - ideal for transportation
Advanced auto-backlight in poor lighting conditions
MIN/MAX hold
Beats minimum accuracy requirements
LCD display
Auto power off when let idle
50mm LCD display
---
Digital Lux Meter GM1010


*Measuring range:0Lux～200,000Lux/0Fc～185,806Fc
*Accuracy:

±3% rdg±0.5%f.s.(<10,000Lux)
±4% rdg±10dgts.(>10,000Lux)
*Digital Updates:2 times / s
*Photometric sensor:Silicon diode

*Battery life:Not less than 60 hours
*Operating temperature and humidity:0℃～ 40℃, 10%RH ～ 90%RH
*Storage temperature and humidity:-20℃～ 50℃, 10%RH ～ 90%RH
*Power:9Vbattery

*Unit size:52.5*35.5*166mm

*Net weight: 110.4g
*LUX (Lux) / FC (footcandles) Unit
*selection function
*After 5 minute auto power off
*Backlight function
*Maximum and minimum measurements
*Automatic measurement function(AUTO)
*Data rise and fall time is short
*Low battery indication
---
Need to test the level of light been given off by a light source? The KIMO LX50 is suitable for the job.

Featuring a built-in silicone photodiode light sensor, the KIMO LX50 can measure light levels in footcandles, lux or klux. The overall measurement range of this product is from 0 to 10,000 lux (0 to 10 lux) or from 0 to 929 footcandles.

Using the meter is simple - just hold the sensor as close as possible to the light source and it'll start to display the level of light detected on the screen. At the touch of the HOLD button you can freeze the current value shown on the screen (ideal for those applications where it may be difficult to see the screen while measuring).

This instrument is supplied as standard with a 1 year guarantee against manufacturing defects from KIMO.

KIMO LX50 Light Meter Key Features

Light meter with integrated silicone photodiode sensor
Measure light in lux, klux or footcandles
Lux range from 0 to 10,000 lux (0 to 10klux)
Footcandle range from 0 to 929FC
Accurate measurements within ±3% of reading ±3 lux
HOLD function temporarily stores current value shown on the screen
Powered by 4 x AAA batteries with life of 20 hours
Automatic power off when left idle for 20 minutes to help save battery life